Detailed explanation of the function and technolog

Detailed function and technology of belt cold and hot shock test chamber

detailed function and technology of belt cold and hot shock test chamber

Haida instrument/

belt cold and hot shock test chamber is used to test the degree of composite materials and material structures that can be endured in a continuous environment such as isothermal and extremely low temperature of spring steel in an instant, that is, to test the chemical changes or physical damage caused by thermal expansion and cold contraction in the shortest time. Applicable objects include metal, plastic "More than 235 researchers at the University of Manchester are committed to the research of two-dimensional materials of graphene, such as rubber, electronics... And other materials, which can be used as the basis or reference for the improvement of their products.

technical parameters of tape cold and hot shock test chamber

outer box size: 150 * 195 * 145 mm

inner box size: 35 * 35 * 40 mm

high temperature: 80 ~ 200 ℃

low temperature: -55 ℃ ~ 10 ℃

temperature uniformity: +/-2 ℃

temperature.Recovery time: 5min

Damper switching time: 10sec

heating time: 60 ~ 200 ℃ takes about 25min

cooling time: 20 ~ -55 ℃ less than 60min

impact recovery time: high temperature (150 ℃) impact for 30 minutes

low temperature (-40 ℃ or-55 ℃ or-60 ℃ after fine measurement) Impact 30 minutes impact recovery time 5 minutes

outer box material: sus 304 stainless steel plate

internal material: sus 304 mirror stainless steel

thermal insulation material: PU and thermal insulation cotton

structure: multi wing circulating fan

heating system: fin heater

protection system: compressor overcurrent, overheating, overheating, heating dry burning Motor overload protection switch

cooling system: European and American original compressors + finned evaporators + air-cooled or water-cooled condensers

control system: man-machine interface display and control + solid-state relay relay

accessories: 2 spacer frames, 1 test hole

power: 16kw

several positive signal power sources have appeared in the economic operation of China's extruder industry: AC380V 10%, 3Ph 50/60hz

tape cold and hot shock test chamber product features:

perfect shape upgrade, simple panel interface

adopt Japanese made imported color touch LCD Chinese/English microcomputer temperature controller

vertical three box structure, automatic control of circulation process of high and low temperature box, adjustable residence and conversion time, stainless steel liner, multi-form recording, and multiple safety protection measures and devices

perfect protection alarm function: in case of short circuit, electric leakage and over temperature of the working room; In case of abnormal conditions such as compressor overpressure, overload, oil pressure, water cut-off, etc., the screen will automatically display the troubleshooting method of the fault cause machine immediately. When the input voltage is found to be unstable, it has an emergency shutdown device. When the cold and hot shock structure moves,

within 10 seconds

the recovery time of cold and hot shock temperature is within 5 minutes, which can comply with MTL, IEC, JIS, GJB and other specifications